Panasonic P2HD AG-3DP1G Operating Instructions Manual Download

Page: 98 / 140

Chapter

Manipulating

Clips

with

Thumbnails

MEMO:

Displays [NO.] (the number of the text memo),

[OFFSET] (location of the frame with added text
memo in relation to the beginning of the clip),
[PERSON] (person who recorded the text memo
added to the clip), and [TEXT] (contents of the
text memo).

THUMBNAIL:

Displays the location of the frame (frame offset)
and the size (height and width) of the image
selected as the thumbnail image.

PROXY:

Displays the information for a proxy, such as its

format, when a proxy is attached.



NOTE

This unit only displays printable ASCII characters.

Checking and modifying read metadata

The unit allows you to check details of metadata read from
SD memory cards.

PresstheTHUMBNAILbutton.

• The thumbnail screen appears on the LCD

monitor.

PresstheMENUbuttontoselectMETADATA



PROPERTYfromthethumbnailmenu.

• Then the screen shown below appears.

Usethecursorbuttonstomovethepointerto

theitemtoconfirmandpresstheSETbutton.

• Use this function to check loaded metadata

settings.

Whileviewingmetadatasettings,usethecursor

buttonstomovethepointertothedesired

option.Then,presstheSETbutton.

• A soft keyboard screen is displayed, allowing you

to modify the setting.

To set whether or not the uploaded
metadata is recorded

Set “ON”/“OFF” in META DATA



RECORD from the

thumbnail menu. The factory setting is “OFF”.
• The metadata is added to the clip on the card in card slot

L only.

Summary of Contents for P2HD AG-3DP1G













































































































































Search results

Summary of Contents for P2HD AG-3DP1G

Reviews:

Related manuals for P2HD AG-3DP1G

Brands by name

Popular brands

Panasonic P2HD AG-3DP1G, Operating Instructions Manual

Search results

Summary of Contents for P2HD AG-3DP1G

Reviews:

Related manuals for P2HD AG-3DP1G

Brands by name

Popular brands