- Eng-10 -
- Eng-11 -
English
Control Panel
(continued)
Time Setting*
To set the cooking time.
Function Setting
To select a function which you desired.
One Push Setting/Cancel
To set/cancel one push setting. (Press “ ” button 2 seconds)
Menus Setting
To choose desired menu among auto menus.
Weight/Serving/Level Setting
To set desired cooking weight/serving/level among auto menus.
Temperature Setting
To set the temperature of Convection, Fermentation and Steam
Convection.
Note: To ensure safety, the convection temperature will
gradually decrease to 200 °C when using above 200 °C in
cooling and remaining 8 minutes. If you continue to use
above 200 °C
, cooking time will shorter. This not influence
its performance.
* Press “
/
” button for a long time, you can fast forward
or rewind of time setting.
Beep Sound:
Times
Results
None
Did not or could not accept the instruction
Once
Accept the instruction
Twice
Between programmed stages to prompt turn over, stir,
rearrange foods or error message during cooking
Three times
After preheating for manual setting
Long time beeps
After preheating for auto menu setting
Five times
End of any completed program
Notes:
1. The above illustration is for reference only, please subject to the actual product.
2. After 6 minutes without operation after setting the cooking program, including opening or closing the
oven door, the program will automatically be cancelled and revert back to “ ” or enter standby mode.
Open and close the oven door once, it can operate again. If the oven is used for another time without
being unplugged and plugged in again, the last program will be displayed.
3.
: This illustration is placement of accessory for auto cook menus.
