English
English
13
12
Temperature selector (for
NI-GT200
only)
Dry ironing area
Max steam
level position
Steam area
Operating instructions for each part
Be sure to disconnect the power plug from the power outlet
before filling the water tank with water. Do not take out the
water tank while you are using the product.
•
Water inlet
Hold the water tank handle, press the water tank latch upward,
take out the water tank, and add water through the water inlet.
Make sure that the “
MAX
” water level mark on the water tank
is not exceeded. Then attach the water tank onto the power
base correctly. Push it until a click sound is heard.
•
Level adjustment button (for
NI-GT500
only)
Press the button to set the level according to materials
of clothes (See the section “Fabric and ironing
recommendations”).
•
Temperature selector (for
NI-GT200
only)
Select an appropriate temperature level according to
materials of clothes (See the section “Fabric and ironing
recommendations”).
•
Power button
Press the power button. The product will start working. At this
time, the power indicator turns on in red.
To power off the product, press and hold the power
button for about three seconds to disconnect the power
supply.
•
Steam switching button
This product can switch between the enhanced steam level
and the eco steam level through the steam switching button.
Please select an appropriate steam level according to the
thickness of clothes.
Eco steam level: suitable for light clothes that need a little
steam.
Enhanced steam level: suitable for heavy clothes that need
much steam.
The product starts with the eco steam level by default. Press
the steam switching button to switch to your desired level.
It takes about 3 minutes for the eco steam level indicator or
enhanced steam level indicator to become steady on from
flashing in the process from the start to the completion of
preheating of the power base.
•
Level indicator (for
NI-GT500
only)
When the iron starts heating, the level indicator starts flashing.
After the iron finishes heating, the level indicator becomes
steady on. During ironing, the level indicator is always on.
The quick care indicator turns on in red and the optimal care
indicator turns on in blue.
•
Thermostat indicator (for
NI-GT200
only)
When the temperature selector is set above “ Acrylic ” level,
the thermostat indicator will turn on when the iron starts
heating and will turn off when the iron finishes heating. During
ironing, the thermostat indicator will turn on and off to indicate
that the iron is heating.
•
Water shortage indicator
When the water level of the water tank drops below the “
MIN
”
water level mark, the water shortage indicator will turn on and
two beeps will be sounded to remind you of insufficient water
of the water tank. In this case, disconnect the power supply,
remove the water tank, inject water into the water tank through
the water inlet and install the water tank back into the main
body. Then the water shortage indicator will turn off and the
product can start to work properly again.
•
Scale inhibition box (for
NI-GT500
only)
Advanced anti-calc technology.
∙
When water is added into the water tank, the scale inhibitor
in the scale inhibition box will be slowly dissolved into the
water to prevent scale accumulation and stabilize the steam.
The service life of the scale inhibitor is about five years.
∙
Conditions of use: Assumed that 250 ppm hard water is used
and the product is used two or three times a week in average
(about 20 minutes each time).
∙
After each use, please drain residual water in the water tank
to make the scale inhibitor more stable.
∙
Do not remove the scale inhibition box.
∙
To replace the inhibition box, please send your product to an
authorized service center.
•
Descaling indicator
∙
When the product has output steam for up to 100 minutes
accumulatively (for
NI-GT200
only)
∙
When the product has been used for up to 3,100 minutes
accumulatively (for
NI-GT500
only)
The descaling indicator will turn on, indicating that
accumulated scale and other impurities in the product need
to be cleared. Please operate according to “
Descaling
”
instructions in “
Cleaning
”.
After descaling, restart the product and press the reset button.
Then the descaling indicator will turn off and the product can
work properly again.
•
Cable trough
When the product is not in use, the corded hose and power
cord can be stored in the cable trough.
NI-GT500 series-01 EN.indd 8
2021/8/20 14:34:25
