Panasonic NA-D106X1, Service Manual

Page: 28 / 68

28
NA-D106X1
8.2.4. Replacement of Door
1. After performing the procedures for Replacement of Lid
sash (8.2.1), Replacement of Lead wire cover (8.2.2) and
Replacement of Controller (Display side) (8.2.3), lift up
the Door from the Lid hinge (top and bottom) and remove
it.
8.2.5. Replacement of Window cover
1. After performing the procedures for Replacement of Lid
sash (8.2.1), Replacement of Lead wire cover (8.2.2) and
Replacement of Controller (Display side) (8.2.3),
disengage the hooks (both sides and bottom) securing
the Window cover with the slotted screwdriver, etc., and
remove the Window cover from the Door.
8.3. Back panel, V belt, Pulley,
Motor
8.3.1. Replacement of Back panel
1. Remove the drain hose fastener from Back panel.
(Be careful, drain hose takes down may cause for
drain water flow out.)
2. Remove 12 Back panel fixing screws on the back side of
the main unit and remove the Back panel.
8.3.2. Replacement of V belt
1. Remove 2 fixing screws on the Body support H and then
remove the V belt.
Caution:
• When you repair the parts on the bottom of the product,
please wear protective equipment such as gloves.
Not doing this may lead to injury.