Panasonic NA-D106X1, Service Manual

Page: 32 / 68

32
NA-D106X1
8.6. Fan case U and Drying heater
8.6.1. Replacement of Fan case U
1. After replacement Panel A, Dry filter, Filter frame and Top
board (8.1), unscrew the 4 Body support A fixing screws
and the Heater cover A fixing screw, then remove the
Body support A.
2. Then, disengage the 2 hooks on the Connector case B,
remove the Connector case B, disconnect all connector
wires inside the unit and remove the 1 Clamping band.
3. After performing the procedure for Replacement of Back
panel (8.3.1), stretch the Sub hose clamp securing the
Discharge air hose to disconnect the Discharge air hose
from the Tank (outer tub).
*In the figure shown below, the hose clamp is removed
and the Exhaust air hose is disconnected from the Outer
tub cover.