Panasonic NA-D106X1 WM3 Operating & Installation Instructions Manual Download Page 2

Page: 2 / 28

Read before Use

How to Use

Maintenance

When Necessary

Any problem?

For Better Results

• Darkening of colour, colour transfer, creases

and roughness of clothes

FAQ

• Operation sound
• Large vibration or rattling sound
• Blinking

(Water temperature display/Remaining time)

• Remaining “Dry” time does not decrease or

suddenly decrease

• Clothes are not well dried
• Spin only or Drain only setting

Troubleshooting

Error Messages

Contents

Read before Use

Safety Precautions

Part Names

Door Lock

Accessories 7

• Opening the door during operation
• Setting Child Lock

Touch Panel

• Operating buttons/Screen panel (Touch panel)
• To change the operation contents

Laundry Procedure

Laundry Check and
Preparations

• Items that cannot be washed or dried
• Pre-treatment for tough stains
• To prevent darkening of colour

and colour transfer

• To prevent creases and shrinkage caused by drying
• To prevent damage of clothes, drainage failure and

malfunctions

• Use washing nets for delicate underwear

and small items



Preparations for each program ....................... 14

• Bedding
• Hand Wash .......................................................... 16
• Warm wash
• Laundry capacity guideline

Selecting the Program 18

• ECONAVI
• Water temperature

How to Put in Detergent
and Softener

• Timing to put in detergent, etc.
• Guideline of amount used

How to Use

Everyday Washing

• Cotton/ECONAVI

Washing Options

• Hand Wash
• Bedding
• Intensive
• Cotton (30 °C/40 °C)/ECONAVI (40 °C/60 °C)/

Soak ..................................................................... 26

• Manual Setting (Wash/Rinse/Spin)

Drying

Maintenance

• Drain filter/Dry filter
• Drum/Detergent case/Main unit/Window seal ...... 32

When Necessary

Changing the Settings 34

Program Details

......................................

Installation

...............................................

Speciﬁ cations

...........................

Back cover

Summary of Contents for NA-D106X1 WM3





























Search results

Summary of Contents for NA-D106X1 WM3

Reviews:

Related manuals for NA-D106X1 WM3

Brands by name

Popular brands

Panasonic NA-D106X1 WM3, Operating & Installation Instructions Manual

Search results

Summary of Contents for NA-D106X1 WM3

Reviews:

Related manuals for NA-D106X1 WM3

Brands by name

Popular brands