32
33
Drum
Detergent case
Main unit/Window seal
Maintenance
Maintenance
(continued)
Preparation
Turn on the water faucet.
Do not put in clothes.
1
Turn
the
power
on.
2
Select
the
operation.
3
Select
“Tub
Clean”.
4
Start.
5
When water sup-
ply fi nishes, press
the Pause button.
Directly put in
bleach in the
drum.
6
Close the door
and start.
Drum/Main unit, etc.
To prevent black mould and odour
Wash with
chlorine-based
bleach.
(once a month)
Chlorine-
based bleach
for clothes
(Approx.
200 ml)
Note
Chlorine-based bleach for kitchen, oxygen-based bleach or detergent for
kitchen may form excessive bubbles, causing water to drain in the middle
of operation. Due to this, satisfactory result may not be achieved.
Select “Wash”.
(P.8)
Select
“Tub Clean”.
Water is supplied.
After water supply
fi nishes, press the Pause
button. Directly put in into
the drum.
Soak, Rinse and Spin
Approx. 11 hours will be taken.
(Approx. 6 hours for “30 °C”)
When using
warm water
Select “30 °C”.
Wash with water.
If the case is not cleaned, softener may not fl ow smoothly because of soil, or it will get mouldy.
1
Remove the case.
2
Remove the cover. Clean the tube of the
case, back side of the cover and tube.
(P.40)
When dirty
Wipe with a soft cloth.
If lint, water droplets or foreign objects have been attached
on the back of the window seal, wipe them off thoroughly.
(This may cause water leak or smell.)
If dust such as lint is attached in the hole of the window
seal, remove it.
For tough stains
Use a detergent for kitchen and wipe off .
Cover
Hold the
protrusion,
and pull it up.
Wipe off the soil on the main unit side.
Wrung-
out towel,
etc.
Window seal
Hole
When dirty
