10
11
Read before Use
Laundry Procedure
After Dry, the drum rotates 40 seconds every 5 minutes to reduce creases of clothes left unattended until taken out.
(approx. 2 hours)
Note
When the preset timer has been set, the “Anti-crease” operation is performed until approx. 2 hours after the set time.
The “Bedding” program does not perform the “Anti-crease” operation.
You can take out the clothes any time during the “Anti-crease” operation. (The operation ends when the door is
opened)
To disable “Anti-crease”
(P.35)
Auto Tub Clean
*1 For manual setting (P.26)
*2 Not set as default
*3 Performs the detangle operation after the last spin.
By utilizing the momentum of water during high-speed rotation of rinse cycle, this automatically washes away
detergent scum and body soil stains attached on the drum, and inhibits black mould forming.
Auto Tub Clean
Wash
Rinse
Spin
Dry
“Auto Tub Clean” is disabled at the time of purchase. (To set, see P.22)
The Auto Tub Clean works in “Cotton” or “ECONAVI” program with 2 or more “Rinse” cycles.
Anti-crease
(2)
Load the laundry
, and close the door
.
(1)
Sort the laundry
, and make necessary
preparations (P
.12)
Prepare your laundry
T
urn the power on
Select the operation
To select your preferred settings, such as
“Dry” mode (P
.22)
Select the program
Start
How to put in detergent and softener (P
.20)
Put in the detergent
(The indicator blinks while detecting ECONA
VI.)
For “ECONA
VI” (P
.18)
For “Auto
T
ub Clean” (See below)
For “Anti-crease” (P
.10)
Take out the laundry
When the buzzer beeps, the operation
is complete.
Clean the dry fi
lter
. (P
.31)
Maintenance
Wash
Wash
*1
Rinse
*1
Auto Tub Clean
*2
Spin
*1*3
Wash&Dry
Wash
*1
Rinse
*1
Auto Tub Clean
*2
Spin
*1
Dry
Anti-crease
Dry
Dry
Anti-crease
Raise the water tempera-
ture for “Wash” cycle (P.18)
For “Rinse”, water is not warm.
After every
drying operation
