Advanced (Recording pictures)
- 41 -
∫
Cancelling Power LCD or High angle
mode
• If you press and hold [LCD MODE] again for
1 second the screen shown in step
2
is
displayed. Select [OFF] to cancel Power
LCD mode or High angle mode.
• High angle mode is also cancelled if you turn
the camera off or power save mode is
activated.
• The brightness of the pictures displayed on
the LCD monitor is adjusted when Power
LCD mode or High angle mode is activated.
Therefore, some subjects may look different
on the LCD monitor. However, this does not
affect the recorded pictures.
• The LCD monitor automatically returns to
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
• If the screen is difficult to see because of
light from the sun etc. shining on it, use your
hand or another object to block the light.
• High angle mode is not activated in the
following cases.
– In simple mode [
]
– In playback mode [
]
– In print mode [
]
– While the menu screen is displayed
– While the review screen is displayed
