Panasonic LUMIXDMC-FX100 Operating Instructions Manual Download

Page: 10 / 136

- 10 -

Preparation

Charging the Battery
with the Charger

The battery is not charged when the camera
is shipped. Charge the battery before use.

Attach the battery with attention to
the direction of the battery.

Connect the charger to the
electrical outlet.

plug-in type

inlet type

• The AC cable does not fit entirely into the

AC input terminal. A gap will remain as
shown below.

• Charging starts when the [CHARGE]

indicator

lights green.

• Charging is complete when the

[CHARGE] indicator

turns off (after

about 130 minutes).

• When the [CHARGE] indicator flashes,

read

P11

Detach the battery after charging is
completed.

• After charging is completed, be sure to

disconnect the power supply device from the
electrical outlet.

• The battery becomes warm after using it and

during and after charging. The camera also
becomes warm during use. This is not a
malfunction.

• The battery will be exhausted if left for a long

period of time after being charged.
Recharge the battery when it is exhausted.

• The battery can be charged even if it is not

fully discharged.

•

Use the dedicated charger and battery.

•

Charge the battery with the charger
indoors.

•

Do not disassemble or modify the
charger.

Summary of Contents for LUMIXDMC-FX100









































































































































Search results

Summary of Contents for LUMIXDMC-FX100

Reviews:

Related manuals for LUMIXDMC-FX100

Brands by name

Popular brands

Panasonic LUMIXDMC-FX100, Operating Instructions Manual

Search results

Summary of Contents for LUMIXDMC-FX100

Reviews:

Related manuals for LUMIXDMC-FX100

Brands by name

Popular brands