Panasonic LUMIXDMC-FX100 Operating Instructions Manual Download

Page: 107 / 136

Advanced (Playback)

- 107 -

• Formatting irretrievably deletes all the data

including any protected pictures. Check the
data carefully before formatting.

• If the card has been formatted on a PC or

other equipment, format it on the camera
again.

• Use a battery with sufficient battery power or

the AC adaptor (optional) when formatting.

• Do not turn the camera off during formatting.
• It may take longer to format the built-in

memory than the card. (Max. about 15 sec.)

• You cannot format an SD Memory Card or

an SDHC Memory Card when the card’s
Write- Protect switch

is set to [LOCK].

• If the built-in memory or the card cannot be

formatted, consult your nearest Service
Centre.

Summary of Contents for LUMIXDMC-FX100









































































































































Search results

Summary of Contents for LUMIXDMC-FX100

Reviews:

Related manuals for LUMIXDMC-FX100

Brands by name

Popular brands

Panasonic LUMIXDMC-FX100, Operating Instructions Manual

Search results

Summary of Contents for LUMIXDMC-FX100

Reviews:

Related manuals for LUMIXDMC-FX100

Brands by name

Popular brands