212
DVQP1242
Using Menu Functions
Menu list
[Location Logging]
After you send location information (latitude and longitude) obtained by your smartphone/
tablet to this unit, you can write this information on pictures using the unit.
Preparation
Send location information to this unit from your smartphone/tablet.
•You must install “Panasonic Image App” on your smartphone/tablet.
(→
)
→
[Playback
] → [
Location Logging]
1
Use to select [Add Location Data] and press [MENU/SET]
2
Use to select a period for writing location information, and press
[MENU/SET]
•[
] is displayed for pictures that have location information written to it.
■
Abort writing location information
Press [MENU/SET] while location information is being written
•[ ] is displayed for the period of the abort operation.
If selected again while [ ] is displayed, writing location information will resume where it left off.
■
Delete received location information
Use to select [Delete Location Data] and press [MENU/SET]
Use to select a period for deleting location information, and press [MENU/SET]
●
The location information cannot be written in the following cases:
•Pictures that were recorded after you sent the location information
(→
)
•Pictures that already have location information
•Motion pictures recorded in [AVCHD] format
When you use your smartphone/tablet as a remote controller for this unit, you can write the
location information on pictures using the smartphone/tablet.
(→
)
