Panasonic LB-DH7 Series Operator'S Manual Download

Page: 29 / 92

Operations

Web interface operation

This menu allows you to check detailed information and the settings concerning the unit.

System <Monitor>

Indicates system information concerning the unit.

Monitor menu

Vendor Name

Indicates a vendor name of the unit.

Product Name

Indicates a product number of the unit.

Software Version

Indicates a version of software incorporated into the unit.

Release Date

Indicates a release date of software incorporated into the unit.

Location

Indicates information concerning the unit installation location.

Status

Indicates the unit status information.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Additional Information

Indicates additional information of “Status” (only when “Status” is set to “Ready”).

Diagnostic: A self-diagnosis is being performed.
Update Software: Software update is taking place.

Software Information
Display

Indicates the software information.

Summary of Contents for LB-DH7 Series





























































































Search results

Summary of Contents for LB-DH7 Series

Reviews:

Related manuals for LB-DH7 Series

Brands by name

Popular brands

Panasonic LB-DH7 Series, Operator'S Manual

Search results

Summary of Contents for LB-DH7 Series

Reviews:

Related manuals for LB-DH7 Series

Brands by name

Popular brands