10. Help
55
For assistance, please visit http://www.panasonic.com/consumersupport
10.2.2 Cordless handset
“
INCOMPLETE
”
L
The phonebook copy stopped because the destination cordless handset
was out of range. Press
{
STOP
}
to clear the message.
“
MEMORY FULL
”
L
When making a copy, the document being stored exceeded the memory
capacity of the unit. Press
{
STOP
}
to clear the message. Divide the
document into sections.
“
MESSAGE FULL
”
L
There is no room left in memory to record voice messages. Erase
unnecessary messages (page 40, 41).
“
MODEM ERROR
”
L
There is something wrong with the unit’s modem. Contact our service
personnel.
“
NO FAX REPLY
”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
“
NO ITEMS STORED
”
L
You tried to copy your phonebook items to the cordless handset, but your
phonebook was empty.
“
OPEN CABINET
CHECK FILM SLACK
”
“
OPEN CABINET
CHECK FILM TYPE
”
L
Please use genuine Panasonic replacement film (page 7).
L
The ink film is slack. Tighten it (see step 5 on page 11).
L
The fax machine is positioned near appliances such as TVs or speakers
which generate an intense magnetic field.
“
PAPER JAMMED
”
L
A recording paper jam occurred. Remove the jammed paper (page 63).
L
You forced the recording paper into the paper tray too strongly. Remove all
of the installed paper, and re-install it gently.
“
PHONEBOOK FULL
”
L
There is no space to store new items in the phonebook. Erase unnecessary
items (page 23).
L
The phonebook memory of the cordless handset is already full, or became
full when copying phonebook items. Copying was stopped. Press
{
STOP
}
to exit the mode (page 24). Erase other stored items in the cordless handset
phonebook (page 23), then try again.
“
PLEASE WAIT
”
L
The unit is checking that there is no slack or crease in the ink film. Wait for
a moment while the check is completed.
“
RECORDING ERROR
”
L
You recorded your greeting message or memo message less than 1 second
in length and recording has failed. Try again.
“
REDIAL TIME OUT
”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
“
REMOVE DOCUMENT
”
L
The document is jammed. Remove the jammed document (page 64).
L
Press
{
STOP
}
to eject the jammed paper.
“
SERIAL ERROR
”
L
There is something wrong with the unit and the base unit will not work.
Contact our service personnel.
“
TRANSMIT ERROR
”
L
A transmission error occurred. Try again.
L
If you send a fax overseas, try the following:
–
Make sure the other party’s number is a fax number.
–
Use the overseas transmission mode (feature #23 on page 46).
–
Add 2 pauses at the end of the telephone number or dial manually.
“
UNIT OVERHEATED
”
L
The unit is too hot. Stop using the unit for a while and let the unit cool down.
Display
Cause & Solution
“
Busy
”
L
The called base unit is in use.
Display
Cause & Solution
