10. Help
53
For assistance, please visit http://www.panasonic.com/consumersupport
10 Help
10.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the
confirmation and journal reports (page 29).
Message
Code
Cause & Solution
COMMUNICATION ERROR
40-42
46-72
FF
L
A transmission or reception error occurred. Try
again or check with the other party.
43
44
L
A line problem occurred. Connect the telephone line
cord to a different jack and try again.
L
An overseas transmission error occurred. Try using
the overseas mode (feature #23 on page 46).
DOCUMENT JAMMED
-----
L
Remove the jammed document (page 64).
ERROR-NOT YOUR UNIT
53
54
59
70
L
A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
JUNK FAX PROH. REJECT
-----
L
The junk fax prohibitor feature of this unit rejected
fax reception.
MEMORY FULL
-----
L
The memory is full of received documents due to a
lack of recording paper, a lack of ink film or a
recording paper jam. Install paper (page 13), install
ink film (page 11) or remove the jammed paper
(page 63).
NO DOCUMENT
-----
L
The document was not fed into the unit properly. Re-
insert the document and try again.
OTHER FAX NOT RESPONDING
-----
L
The other party’s fax machine is busy or has run out
of recording paper. Try again.
L
The other party’s fax machine rang too many times.
Send the fax manually (page 29).
L
The other party’s machine is not a fax machine.
Check with the other party.
L
The number you dialed is not in service.
PRESSED THE STOP KEY
-----
L {
STOP
}
was pressed, and fax transmission or
reception was canceled.
OK
-----
L
Fax transmission or reception was successful.
