![background image](http://html.mh-extra.com/html/panasonic/kxf-1e4c/kxf-1e4c_operating-instructions-manual_275301104.webp)
Page 1-54
1-7
Check Every 1500 Hours (Once Three Months)
1-7-1
Cleaning and Lubricating the Recognition Unit (X- and Y-axis Linear Bearings)
This unit recognizes the board and mask.
1.
Turn off the servo switch.
2.
Open the front and rear safety covers.
3.
Clean and lubricate the linear bearing.
1.Camera X-axis linear bearing
Apply grease to the rail.
2.Camera Y-axis linear bearing
Lubricate the grease nipple.
4.
Close the front and rear safety cov-
ers.
5.
Turn on the servo switch.
1E4C-E-MMA01-A09-00
OFF ( ) ON ( )
SERVO
OFF ( ) ON ( )
SERVO
Tools
Required time
5 minutes
Camera X-axis linear bearing
Camera Y-axis linear bearing
160HC1AA
Summary of Contents for KXF-1E4C
Page 2: ......
Page 6: ...4 1E4C E MMA00 B01 00 MEMO ...
Page 12: ...10 1E4C E MMA00 A02 01 MEMO ...