Page 1-32
Check Every 140 Hours (Once a Week)
1E4C-E-MMA01-A06-00
1-4-4
Cleaning the Printing Unit (Option)
1.
Remove the printing unit.
(Refer to “10-3-1 Removing the Printing Unit” in
Operation Manual)
2.
Set the printing unit to the mainte-
nance jig.
• Set the printing unit so that the cassette will
face upward.
3.
Loosen both screws setting the cas-
sette holder and pull down the plate
outside.
4.
Open the cassette holder turning 180
degrees and remove the printing
holder together with the holder from
the printing unit.
∗
Be careful that if the cassette holder is open
while solder is leaving in the cassette, solder in
the cassette is drawn out.
Tools
Maintenance jig, cleaning jig
Required time
30 minutes
1E4C-427P
To the next page
1E4C-428P
Plate
1E4C-429P
1E4C-430P
Maintenance jig
Cassette
Cassette holder
Summary of Contents for KXF-1E4C
Page 2: ......
Page 6: ...4 1E4C E MMA00 B01 00 MEMO ...
Page 12: ...10 1E4C E MMA00 A02 01 MEMO ...