Page 1-46
1E4C-E-MMA01-A08-00
1-6
Check Every 1000 Hours (Once Two Months)
1-6-1
Cleaning and Lubricating the Linear Shaft for Squeegee Head
This unit drives the squeegee and the print.
1.
Turn off the servo switch.
2.
Open the front safety cover.
3.
Remove the squeegee head cover.
∗
Remove 4 bolts and remove the cover by lifting
it upward.
4.
Clean and lubricate the linear shaft.
1.Linear shaft for squeegee head
Apply grease to the linear shaft as shown in
the drawing.
5.
Install the cover removed at step 3.
6.
Close the front safety cover.
7.
Turn on the servo switch.
1E4C-403E
Tools
4 mm hexagon Allen wrench
Required time
10 minutes
OFF ( ) ON ( )
SERVO
OFF ( ) ON ( )
SERVO
Linear shaft for
squeegee head.
Summary of Contents for KXF-1E4C
Page 2: ......
Page 6: ...4 1E4C E MMA00 B01 00 MEMO ...
Page 12: ...10 1E4C E MMA00 A02 01 MEMO ...