Panasonic KX-TVS120, Installation Manual

Page: 328 / 436

SYSTEM MANAGER'S GUIDE
328 Installation Manual
Caller ID Screening
Message Notification
23. a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
24. a)
The current setting plays. Press [1] to change the setting (enable or disable). If the
Message Notification is enabled, go to Step 24b below.
b)
Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number Entry
Mode.
• [1] Caller Select Mode
• [2] Without message mode
• [3] Before message recording mode
• [4] After message recording mode
• [5] Disable All Entry Mode (Caller cannot access beeper)
c)
Confirm the entry is correct and Press [6] to accept it.
d)
The current setting of MWL Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
e)
Confirm the entry is correct and Press [2] to accept it.
f)
The current setting of Device Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
g)
Confirm the entry is correct and Press [2] to accept it. Return to Step 24a above.