Panasonic KX-TVS120, Installation Manual

Page: 205 / 436

SYSTEM MAINTENANCE AND TROUBLESHOOTING
Installation Manual 205
Unable to access the
mailbox. • Improper setting of the
mailbox number. • Readjust the number of digits in
the mailbox number (see
"Mailbox Number" in Table 40
in B2
SYSTEM
ADMINISTRATION—
MAILBOXES).
Unable to access to Operator
1 • Improper setting of the
operator extension number. • Adjust the operator extension
number to that of the connected
PBX (see "Operator's
Extension" in Table 49 in
B5.1
Automated Attendant
Parameters).
Connected terminal (RS-
232C port) does not operate. • Improper connection.
• Improper setting of the
parameter.
• Be sure you are using a null
modem cable (see
2.8
TERMINAL
CONNECTION).
• The terminal and VPS should
have the same parameter
settings for Baud Rate, Word
Bit Length, Parity and Stop Bit
Length (see B7.1
RS-232C
Parameters).
Unable to make
reconnection when the line is
busy. • Improper setting of the busy
signal reconnection procedure. • Readjust the busy signal
reconnection procedure to that
of the connected PBX (see
"Reconnect Sequence on Busy"
in Table 79 in B7.3
PBX
Interface Parameters).
Unable to make a no-
response reconnection. • Improper setting of the no-
response reconnection
procedure. • Readjust the no-response
reconnection procedure to that
of the connected PBX (see
"Reconnect Sequence on No
Answer" in Table 79 in
B7.3
PBX Interface
Parameters).
Unable to generate a call
waiting tone from the VPS. • Improper setting of sequence. • Adjust the Call Waiting
sequence to that of the
connected PBX (see "Call
Waiting Sequence" in Table 79
in B7.3
PBX Interface
Parameters).
Table 35
PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION