Panasonic KX-TVS120, Installation Manual

Page: 256 / 436

SYSTEM ADMINISTRATOR'S GUIDE
256 Installation Manual
Personal
Greeting for
CID 1. Yes
2. No
(Yes)
If set to "Yes", subscribers can utilize the personal
greeting feature for Caller ID.
Caller ID
Screening 1. Yes
2. No
(Yes)
If set to "Yes", subscribers can utilize the Caller ID
Screening feature.
Authorization
for Message
Notification 1. Yes
2. No
(No)
If set to "Yes", subscribers are able to utilize the Message
Waiting Notification feature. The sub-parameters to be
set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
Note : This parameter in COS No.1 is set to "Yes" when
the Quick Setup procedure is used to create Subscriber
Mailboxes.
Beeper
Callback
No. Entry
Mode 1. Caller Select
2. Without
3. Before
4. After
5. Disable
(Disable)
Permits subscribers to use the Callback Number Entry
feature.
Caller
Select: After recording a message, the caller is
asked if the message is urgent. If urgent, the
caller is asked to enter the callback number.
Without: Without recording a message, the caller is
asked to enter the callback number.
Before: Before recording a message, the VPS asks
the caller to enter the callback number.
After: After recording a message, the VPS asks
the caller to enter the callback number.
Disable: Disables the Callback Number Entry
feature.
Note : To utilize this feature, the callback number entry
code must be included in the subscriber's beeper number.
When "Disable" is selected or if the caller does not enter
a callback number, "System Callback No." (see Table
67) will be displayed on the beeper's display. If a caller's
number is received through a telephone company's
Caller ID service, the caller's number will be displayed
instead of "System Callback No.".
Table 44
Parameter Value Range
(Default)
Description/Function