Panasonic KX-TVS120, Installation Manual

Page: 247 / 436

SYSTEM ADMINISTRATOR'S GUIDE
Installation Manual 247
Notification Setting
Follow the procedure below to set the parameters for the Message Waiting Notification Device
feature. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.
• Class of Service programming determines if the subscriber is able to use this feature.
• If the destination device is a telephone, the subscriber will be called when he has
message(s), and will have a chance to listen to the message(s).
• If the destination device is a beeper, the subscriber will be notified when he has
message(s). If the beeper has a display, it is possible to send to it a callback number. The
caller can enter the callback number when he leaves a message. If he does not enter a
callback number, either the System Callback No., or the caller's number if it is received
through a telephone company's Caller ID service, will be sent instead.
Interview
Mailbox
Number 2-5 digits
(None)
Permits a mailbox owner to own an interview mailbox. The
interview mailbox number must be an unassigned mailbox
number.
Note : The replies to an interview session constitute one
message. If the subscriber expects many interview
messages, "Mailbox Capacity Maximum Messages" (see
Table 44 in B3
SYSTEM ADMINISTRATION—
SETTING COS (CLASS OF SERVICE) PARAMETERS)
should be raised to a higher value. Possibly, the subscriber
should be assigned to a different COS.
All Calls
Transfer to
Mailbox 1. Yes
2. No
(No)
If this parameter is set to "Yes", all calls routed to the
extension are automatically forwarded to the extension's
mailbox without ringing the telephone. Forwarding is
accomplished through the Automated Attendant service.
Callers are permitted to leave a message.
Note : When this feature has been set to "Yes", the mailbox
owner's extension does not necessarily need to exist as a
phone extension of the PBX.
To access the proper menu for Message Waiting Notification, follow the menu path
as shown:
System Administration Top Menu-1-1-1-Mailbox No.-2-Device No. 1, 2, or 3.
Table 41
Parameter Value Range
(Default)
Description/Function