Panasonic KX-TG2236S Operating Instructions Manual Download

Page: 22 / 72

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:

•

Talk alternately with the caller in a quiet room.

•

If the other party has difficulty hearing you, press

to decrease the speaker

volume.

•

If the other party’s voice from the speaker cuts in/out during a conversation,
press

to decrease the speaker volume.

•

While talking using

, you can switch to the hands-free phone

conversation by pressing

. To switch back to the receiver, press

To have a hands-free phone conversation
(Using Digital Duplex Speakerphone)

Press .

Dial a phone number.

•

The dialed number is displayed.

•

After a few seconds, the display will show the
length of the call and the battery strength.

When the other party answers, talk into the
microphone.

To hang up, press

(OFF)

or place the

handset on the base unit.

•

If the handset has lost communication with the base unit, 3 beeps sound and “

link to base Place on cradle and try again.

” is displayed.

SP-phone

1112222

SP-phone

00-00-00

SP-phone

Off

00-01-08

If noise interferes with the conversation

Press

to select a clearer channel in the talk, speakerphone or

intercom mode, or move closer to the base unit.

To redial the last number dialed on the handset

Press or and

press

(REDIAL/PAUSE)

Making Calls

Summary of Contents for KX-TG2236S









































































Search results

Summary of Contents for KX-TG2236S

Reviews:

Related manuals for KX-TG2236S

Brands by name

Popular brands

Panasonic KX-TG2236S, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2236S

Reviews:

Related manuals for KX-TG2236S

Brands by name

Popular brands