Panasonic KX-TG2236S Operating Instructions Manual Download Page 44

Page: 44 / 72

Editing

Make sure the unit is not being used and the handset is lifted off the
base unit.

Press

to enter the directory list.

Press

•

The first item is displayed.

Scroll to the directory item you want to
change by pressing

, and press

•

To search for the item by initial, see page 42.

•

If you do not need to change the name, go to
step 5.

Edit the name using the dialing buttons,

(p. 40), up to 15 characters.

Press

(

key).

Add a number to the current number.

•

If you do not need to change the number,
press

(

key) and go to step 8.

•

Each time you press

(CLEAR)

, a digit is

erased. To erase all digits, press and hold

(CLEAR)

Press

(

key).

•

If you want to change the storing name or
number, press

(

Edit

key) repeatedly to

reach the desired display and change it.

When finished, press

(

Save

key).

•

A beep sounds.

•

To continue editing other items, repeat from
step 3.

•

To exit the directory list, press

(OFF)

•

You can exit the directory mode any time by pressing

(OFF)

Jane
456-7890

Enter name
Jane Walker

=Next

4567890

=Next

12344567890

=Next

Enter name
Jane

=Next

Jane Walker
1-234-456-7890

=Edit

=Save

Directory

Jane Walker
1-234-456-7890

Summary of Contents for KX-TG2236S









































































Search results

Summary of Contents for KX-TG2236S

Reviews:

Related manuals for KX-TG2236S

Brands by name

Popular brands

Panasonic KX-TG2236S, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2236S

Reviews:

Related manuals for KX-TG2236S

Brands by name

Popular brands