60
Troubleshooting
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller’s name and/or phone
number.
Remedy
•
Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory list.
•
Do not pause for over 60 seconds while
programming.
•
Move closer to the base unit.
•
Ö
,
Ñ
,
Ü
or
á
may have been
pressed when you picked up the
handset. Press
(OFF)
and try again.
•
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•
You cannot store an item in the directory
while the unit is in the talk, speaker or
intercom mode or while storing phone
numbers in the base unit.
•
Do not pause for over 60 seconds while
storing.
•
To answer the call, press
,
or
(SP-PHONE)
.
Start again from the
beginning after hanging up.
•
You need to subscribe to a Caller ID
service.
•
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•
Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•
Telephone line noise may be affecting
the Caller ID information.
