Panasonic KX-TG2236S Operating Instructions Manual Download Page 52

Page: 52 / 72

Special Features

For Call Waiting Service Users

Press

(FLASH/CALL!WAIT/VOICE!MAIL)

(FLASH/CALL!WAIT)

if you hear

a call-waiting tone while talking.

•

The first call is put on hold and you can answer the second call.

•

To return to the first caller, press

(FLASH/CALL!WAIT/VOICE!MAIL)

(FLASH/CALL!WAIT)

again.

•

The call waiting service cannot be used when a parallel connected telephone is
in use.

•

If this function does not operate properly, consult your telephone company for
details.

Call Waiting Caller ID Feature

Call Waiting Caller ID Feature allows your
handset to display the second caller’s
information. After you hear a call-waiting tone
while talking, the handset will display the caller’s
name with the phone number and
“

----Waiting----

”.

•

Please contact your telephone company for details and availability in your area.

•

While talking with the base unit, the handset off the base unit will not display the
caller’s information.

How to Use the PAUSE Button

(For Analog PBX Line/Long Distance Service Users)

We recommend you press

(REDIAL/PAUSE)

if a pause is required for

dialing with a PBX or to access a long distance service.
Ex. Line access number

(9)

(PBX)

(9)

(REDIAL/PAUSE)

•

Pressing

(REDIAL/PAUSE)

once creates a 3.5 second pause. This prevents

misdialing when you redial or dial a stored number.

•

Pressing

(REDIAL/PAUSE)

more than once increases the length of the pause

between numbers.

Phone number

BROWN,NANCY
1-555-666-7777
----Waiting----

Summary of Contents for KX-TG2236S









































































Search results

Summary of Contents for KX-TG2236S

Reviews:

Related manuals for KX-TG2236S

Brands by name

Popular brands

Panasonic KX-TG2236S, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2236S

Reviews:

Related manuals for KX-TG2236S

Brands by name

Popular brands