Panasonic KX-TG2236S Operating Instructions Manual Download Page 70 | Manualshive

Page: 70 / 72

background image

70

Customer Services Directory

For Product Information, Operating Assistance, Literature Request,
Dealer Locations, and all Customer Service inquiries please contact:
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday
9 am-7 pm, EST.
or send e-mail :
[email protected]

Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
nearest servicenter by visiting our Web Site.

Accessory Purchases:

1-800-332-5368 (Customer Orders Only)
Panasonic Services Company 20421 84th Avenue South, Kent, WA
98032
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)
(Visa, MasterCard, Discover Card, American Express, Check)

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/
Factory Servicenter:

Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,

Carolina, Puerto Rico 00985

Phone (787)750-4300

Fax (787)768-2910

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes
damages for lost time, lost calls or messages, cost of having someone remove or re-install
an installed unit if applicable, travel to and from the servicer. The items listed are not
exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Servicenter. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses
listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.

«
...
68
69
70
71
72
»

Summary of Contents for KX-TG2236S









































































Reviews:

No comments

Related manuals for KX-TG2236S

Brand: NEC Pages: 32

Brand: Samsung Pages: 2

Brand: Samsung Pages: 3

Brand: i-onik Pages: 6

Brand: i-MOBIL Pages: 10

Brand: CEECO Pages: 12

Brand: Walton Pages: 16

Brand: Uniden Pages: 48

Brand: OCL Pages: 2

Brand: JabloCom Pages: 2

Brand: Topcom Pages: 20

Brand: Yealink Pages: 26

Brand: CHARITY MOBILE Pages: 14

Brand: Geemarc Pages: 28

Brand: Yealink Pages: 264

Brand: AEG Pages: 204

Brand: Huawei Pages: 25

Brand: Huawei Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands