MP-3000 M Installation Guide
4. Insert the other end of the MOH cord into either
the 8
Ω
or 600
Ω
output jack located on the back
of the MP-3000 M player until it clicks in place.
Depending upon the required impedance, use
either the 8
Ω
or 600
Ω
output RCA jack,
not both
.
[FIG 4]
FIG 4
3. Insert one end of the MOH cable into the MOH port
located on the phone system.
[FIG 3]
If you can not locate the
MOH port on your telephone system, please contact your
telephone vendor for location.
FIG 3
MOH
Please note the contents included with your MP-3000 M
on-hold player shipment. [FIG 1]
FIG 1 - Contents of MP-3
3000 M Install Package
2. Locate the included MOH cord (Qty 1)
[FIG 3]
1. The MP3000 M is preloaded with the
programming software and pre-programmed
with several of the 24 starter messages. If you
would like to make any programming
changes, please refer to the Programming
Guide. Please give the enclosed Certificate
[FIG 2]
along with the Programming Guide
to the person who has signed the Certificate
for their
records.
USB Stick
MP-3000 M MOH Unit
Power Cord
MOH Cable
Certificate
FIG 2
FIG 3
