60
Other Programmable Settings
4
Select “
B
” or “
A
” by pressing
or
for each line. To move to
the other line, press
H
or
I
.
5
Press
(ENTER)
.
•
A beep sounds.
•
To return to the standby mode,
press
(EXIT)
.
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise, the line indicator may not operate properly, the Visual Call
Waiting (Call Waiting ID) Service may not be used (p. 48), you may not
hear the incoming call tone (p. 56), and the unit may not alert your pager
(p. 87). Both lines are preset to “A”.
Make sure that the base unit is in the standby mode.
Base Unit
1
Press
(FUNCTION)
.
2
Press
or
until the arrow
points to “
Line setting
”, and
press
H
.
3
Press
or
until the arrow
points to “
Set line mode
”,
and press
H
.
•
The current settings are displayed.
L i n e m o d e
L i n e 1 L i n e 2
A A
Erasing the Directory, Caller List and
Redial List
You can erase all entries in the directory, caller list and redial list.
Programming must be carried out separately for the base unit and
cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
Base Unit Handset
1
Press
(FUNCTION)
.
2
Press
or
until the arrow
points to “
Initialization
”,
and press
H
.
3
Press
or
until the arrow
points to “
Dial data
”, and
press
H
.
•
The current settings are displayed.
RDL=Redial List CID=Caller List
DIR=Directory
4
Select “
Yes
” to erase the list by
pressing
or
. Select “
No
”
to leave the list. To move to
another list, press
H
or
I
.
5
Press
(ENTER)
.
•
A beep sounds.
•
To return to the standby mode,
press
(EXIT)
.
D e l e t e d i a l d a t a
R D L C I D D I R
N o N o N o