51
Chapter 3
Advanced Operation
•
In step 2, you can also select the desired option by pressing
or
, until the
option flashes, then pressing
(CALL!WAIT)
.
•
To cancel the option menu, press
(EXIT)
or wait for 20 seconds. The display will
return to the length of the call.
•
The call waiting service cannot be used when:
— the first call on the same line is placed on hold,
— a parallel connected telephone is in use,
— you are having a conference call (p. 37), or
— the Automated Attendant System or Answering System is responding to the
first call on the same line (p. 63, 70).
•
If this function does not operate properly, consult your telephone company for
details.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press
(TONE)
before entering access numbers which require tone dialing.
•
The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse.
•
Access numbers entered after pressing
(TONE)
will not be included when
redialing.
Base Unit Handset
After selecting “
Ans
” (Answer) or “
Hold
”:
You can choose one of the following options:
“
Return
”—to return to the waiting call.
“
Drop
”—to hang up the current call
and answer the waiting call.
“
Conference
”—to make a conference call.
Press
(CALL!WAIT)
to display the option menu. Enter a displayed option
number (1 to 3) to select the desired option.
•
If “
Return
” is selected, you can choose an option in the same option menu
again. Press
(CALL!WAIT)
.
After selecting “
Conf
” (Conference):
You can choose one of the following options:
“
Drop caller1
”—to hang up the first call.
“
Drop caller2
”—to hang up the second
call.
Press
(CALL!WAIT)
to display the option menu. Enter a displayed option
number (1 or 2) to select the desired option.
1 : R e t u r n
2 : D r o p
3 : C o n f e r e n c e
1 : D r o p c a l l e r 1
2 : D r o p c a l l e r 2
