Panasonic KX-TG173SK Operating Instructions Manual Download

Page: 49 / 76

YES

Proceed with the operation for your unit.

Handset:

OFF

Base unit:

EXIT

Playing back the greeting message

Handset / Base unit

MENU

N#303

Proceed with the operation for your unit.

Handset:

To exit, press

OFF

Base unit:

To exit, press

EXIT

Listening to messages

Important:

When using the base unit or handset to listen to
messages, the noise reduction feature
(page 19) is activated automatically in spite of
the setting (

is not displayed).

Using the base unit

When new messages have been recorded:
–

on the base unit flashes.

–

“

New message

”

is displayed.

Press

(PLAY).

During playback,

on the base unit lights.

If new messages have been recorded, the base
unit plays back new messages.

If there are no new messages, the base unit
plays back all messages.

Operating the answering system during
playback

Key

Operation

MDN

MCN

Adjust the speaker volume

Repeat message

Skip message

PAUSE

Pause message
To resume playback, press

(STOP) Stop playback

ERASE

Erase currently playing message

*1 If pressed within the first 5 seconds of a

message, the previous message is played.

Calling back (Caller ID subscribers only)

Lift the corded handset during playback.

To edit the number before calling back, press

EDIT

repeatedly until the phone number is

shown in the desired format (page 47).

Erasing all messages

Press

ERASE

2 times while the unit is not in use.

Using the handset

When new messages have been recorded,

“

New

message

”

is displayed.

To listen to new messages:

MENU

N#323

To listen to all messages:

MENU

N#324

When finished, press

OFF

Note:

To switch to the receiver, press

You can also use the

PLAY

soft key, if

displayed, to play new messages.

Operating the answering system

MENU

MbN

“

Answering device

”

SELECT

Key

Operation

MDN

MCN

Adjust the receiver/speaker volume
(during playback)

MFN

Repeat message (during
playback)

MEN

Skip message (during playback)

Enter the

“

Settings

”

Play new messages

Play all messages

Play greeting message

Record greeting message

Turn answering system on

PAUSE

Pause message

STOP

Stop recording
Stop playback

Turn answering system off

Erase currently playing message

Erase all messages

For assistance, please visit http://shop.panasonic.com/support

Answering System

Summary of Contents for KX-TG173SK













































































Search results

Summary of Contents for KX-TG173SK

Reviews:

Related manuals for KX-TG173SK

Brands by name

Popular brands

Panasonic KX-TG173SK, Operating Instructions Manual

Search results

Summary of Contents for KX-TG173SK

Reviews:

Related manuals for KX-TG173SK

Brands by name

Popular brands