Handset battery charging
Charge for about 7 hours.
R
Confirm
“
Charging
”
is displayed (
1
).
R
When the batteries are fully charged,
“
Fully
charged
”
is displayed.
1
Handset battery level
Icon
Battery level
High
Medium
Low
/
Needs charging.
Empty
Note:
R
At the end of each call, the unit displays a large
icon for a few moments to indicate the battery
level.
R
You can set the unit to play a voice
announcement when the battery is low or needs
charging (page 16).
Ni-MH battery performance (supplied batteries)
Operation
Operating time
In continuous use
13 hours max.
Not in use (standby)
12 days max.
*1 If eco mode is on.
Note:
R
Actual battery performance depends on usage
and ambient environment.
Base unit battery installation (for
power backup)
You can insert 2 AAA (R03) batteries (not
supplied) into the base unit that will power the unit
temporarily in the event of a power failure.
Important:
R
The following batteries can be used with the
base unit:
– Rechargeable Ni-MH batteries
*1,
the batteries used in your handset(s))
– Standard (non-rechargeable) alkaline
batteries
R
Do NOT use manganese batteries.
R
Confirm correct polarities (
,
).
*1 The base unit can fully charge Ni-MH batteries
in about 15 hours.
*2 We recommend using HHR-4DPA batteries
(page 4).
*3 Only insert alkaline batteries once a power
failure occurs. Remove the alkaline batteries
when power is restored.
1
Disconnect the telephone line cord (
A
).
2
Open the battery cover (
B
).
3
Install the batteries in the battery compartment
(
C
).
4
Close the cover, then reconnect the telephone
line cord (
D
).
B
C
D
A
For assistance, please visit http://shop.panasonic.com/support
11
Getting Started
