manualshive.com logo in svg

Panasonic KX-TDE100, Programming Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

Programming Manual References

3.1  [1-1] Slot

Feature Guide References

1.17.7  Built-in Simplified Voice Message (SVM)

SVM Cyclic Tone Option—Tone Off Maximum Time

Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone company before
recognising it as a tone-off. When no tone is detected within the time set here, the PBX recognises it as a
tone-off.
Note that this option can only be set when 

SVM Cyclic Tone Detection on this screen is set to "Option".

To apply changes to this setting, follow the steps below:

1.

Change this setting.

2.

Set the status of the IPCMPR/IPCEMPR card or OPB3 card to "

OUS

", then "

INS

". See 

3.5  [1-1] Slot—

OPB3 Card Property

 or 

3.58  [1-1] Slot—OPB3 Card Property

.

Value Range

20 

´

 n (n=6–200) ms

Maintenance Console Location

7.5  [5-3-3] Voice Message—SVM

Programming Manual References

3.1  [1-1] Slot

Feature Guide References

1.17.7  Built-in Simplified Voice Message (SVM)

SVM Cyclic Tone Option—Repeating Times of ON/OFF for Detection

Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to establish
reception of the cyclic tone. This determines the end of call.
Note that this option can only be set when 

SVM Cyclic Tone Detection

 on this screen is set to "Option".

Value Range

3–16

Maintenance Console Location

7.5  [5-3-3] Voice Message—SVM

Programming Manual References

None

840

PC Programming Manual

7.5 [5-3-3] Voice Message—SVM

Summary of Contents for KX-TDE100



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands