Setting Features
Q
How do I change the dialling mode of an analogue trunk?
A
•
From the
3.30 [1-1] Slot—Port Property - LCO Port
screen, change the
Dialling
Mode
setting of the target port to "DTMF" or "Pulse", as required.
Q
How do I set disconnect detection (CPC Detection) for an analogue trunk?
A
•
From the
3.30 [1-1] Slot—Port Property - LCO Port
screen, modify the
CPC
Signal Detection Time—Outgoing, Incoming
setting of the target port.
The required value varies by carrier. Transmission and reception can be set
separately.
Q
What settings do I change to enable use of an extension ISDN telephone?
A
•
From the
3.33 [1-1] Slot—Port Property - BRI Port
screen, set the
Port Type
of
the port you want to use to "Extension".
Q
When using a TE with an extension ISDN, how do I enable power output?
A
•
From the
3.33 [1-1] Slot—Port Property - BRI Port
screen, set
ISDN TE Power
on the
ISDN Extension
tab to "Enable".
Q
How do I connect to another PBX using QSIG?
A
•
From the
3.33 [1-1] Slot—Port Property - BRI Port
or
3.35 [1-1] Slot—Port
Property - PRI Port
screen, set the
Port Type
of the port you want to use to either
"QSIG-Slave" or "QSIG-Master".
Q
How do I change the type of an extension port?
A
•
Set the port to OUS status. Then, change
DPT Type—Type
in the
3.24 [1-1] Slot
—Port Property - Extension Port
window
Q
I have set the type of an extension port to "DSS Console", but I cannot apply this
setting. (Error E000402)
A
•
The number entered in
DPT Type—Location No.
on the
3.24 [1-1] Slot—Port
Property - Extension Port
screen is the same as that entered for another DSS
Console. Change this so that the numbers do not overlap.
Q
I have set the type of an extension port to "VM (DPT)", but I cannot apply this setting.
(Error E000403)
A
•
The
DPT Type—VM Unit No.
and
DPT Type—VM Port No.
settings entered on
the
3.24 [1-1] Slot—Port Property - Extension Port
screen are the same as those
entered for another VM (DPT). Change this so that the numbers do not overlap.
Q
I have set the type of an extension port to "PC Console", but I cannot apply this
setting. (Error E000402)
A
•
The number entered in
DPT Type—Location No.
on the
3.24 [1-1] Slot—Port
Property - Extension Port
screen is the same as that entered for another PC Console.
Change this so that the numbers do not overlap.
100
PC Programming Manual
2.7.1 Frequently Asked Questions (FAQ)
Summary of Contents for KX-TDE100
