manualshive.com logo in svg

Panasonic KX-TDE100, Programming Manual, Page: 472 / 1018

Share
Download
Panasonic KX-TDE100 Programming Manual Download Page 472

Feature Guide References

1.13.1  Call Hold

Tone Length—Busy Tone / DND Tone

Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in busy status
or DND mode. A reorder tone will be sent when this timer expires. (For a call through DISA, the call will be
disconnected when this timer expires.)

Value Range

0 (continuous)–15 s

Maintenance Console Location

4.5  [2-3] Timers & Counters

Programming Manual References

None

Feature Guide References

1.3.1.3  Do Not Disturb (DND)
1.8  Busy Line/Busy Party Features

Tone Length—Reorder Tone for PT Handset

Specifies the length of time that a reorder tone is heard when using a PT handset. The PT will return to idle
status when this timer expires.

Value Range

1–15 s

Maintenance Console Location

4.5  [2-3] Timers & Counters

Programming Manual References

None

Feature Guide References

1.5.2  Automatic Extension Release

Tone Length—Reorder Tone for PT Hands-free

Specifies the length of time that a reorder tone is heard from the built-in speaker of a PT in hands-free mode.
The PT will return to idle status when this timer expires. This setting is applied to PSs as well as PTs.

Value Range

1–15 s

472

PC Programming Manual

4.5 [2-3] Timers & Counters

Summary of Contents for KX-TDE100



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments