manualshive.com logo in svg

Panasonic KX-TDE100, Programming Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

2.6  Utility

2.6.1  Utility—Diagnosis

Performs diagnostic tests on cards installed in the PBX, to identify the source of problems.
If any of the tests listed here returns the result "NG" ("No Good"), contact your dealer. Test results can be
saved as a TXT-format (text) file.
When testing is complete, any cards that were set to OUS status must be returned to INS status if they are to
be used again.

Card Test

Tests the relevant functions of a card to ensure that it is operating correctly. The tests carried out vary according
to the type of card being tested.

The tests that are performed on each card are as follows:

Test Type

Available Cards

Local loop back diagnosis

DHLC, DLC, SLC8, SLC16, MSLC16, ESLC16, EMSLC16,
CSLC16, ECSLC24, CSIF, LCOT, ELCOT, T1, E1, BRI, PRI, OPB,
E&M, DID, IP-EXT

Card CT Bus diagnosis
(KX-TDE100/KX-TDE200 only)

DHLC, DLC, SLC8, SLC16, MSLC16, CSLC16, CSIF, LCOT, T1,
E1, BRI, PRI, OPB, E&M, DID, IP-EXT

DTMF Receive test port

DHLC, SLC8, SLC16, MSLC16, ESLC16, EMSLC16, CSLC16,
ECSLC24, E&M, DID

PT loop back diagnosis

DHLC, DLC

DSP DTMF generator/receiver
diagnosis

T1, E1

DSP DTMF receiver diagnosis

T1, E1

Framer IC alarm signal detection
diagnosis

T1, E1, PRI

Framer IC error detection diagnosis

T1, E1, PRI

CS-INF loop back diagnosis

CSIF

Super frame synchronization
diagnosis

CSIF

Caller ID card loop back diagnosis

LCOT, ELCOT

Extension mode setting test

BRI

IP-GW H.323 call simulate diagnosis

IP-GW4, IP-GW16

LAN loop back diagnosis

IP-GW4

To perform a card test
1.

From the 

Utility

 menu, select 

Diagnosis

.

2.

Click on the 

Status

 cell of the card to be tested, and set it to "OUS".

64

PC Programming Manual

2.6.1 Utility—Diagnosis

Summary of Contents for KX-TDE100



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands