Panasonic KX-TDE100 Page 84 Programming Manual Download

Page: 84 / 1018

2.6.14 Utility—IP Extension Statistical Information

Displays accumulated statistical information on IP extensions, IP-EXT cards, V-IPEXT32 cards, V-IPCS4
cards, and the DSP card.

The displayed items are as follows:

Item

Description

Collection Started Time

Date and time the port was last reset.

Port No.

Number of the port.

RTP Receive Packet Counter

Total number of packets received.

RTP Receive Lost Packet Counter

Total number of packets lost.

RTP Receive Abandoned Packet Counter

Total number of packets abandoned.

RTP Arrive Packet Interval (MAX.) [ms]

Maximum time taken for a packet to
arrive.

RTP Arrive Packet Interval (MIN.) [ms]

Minimum time taken for a packet to
arrive.

To view IP extension information
1.

From the

Utility

menu, select

IP Extension Statistical Information

From the

Card Selection

drop-down list, select the slot number for the card. "IPCMPR (VoIP-DSP)" can

be selected for the DSP card when

DSP Card Status

is enabled. See

3.4 [1-1] Slot—Card Property -

IPCMPR

Click

Execute

The statistical information will be displayed.

Select an option:

•

Click

Capture

if you want to save the displayed information.

Enter a file name, or select a file to overwrite.

Click

Save

•

Click

Clear

to erase the information and reset the Collection Started Time.

Click

Cancel

to return to the main screen.

PC Programming Manual

2.6.14 Utility—IP Extension Statistical Information

Summary of Contents for KX-TDE100


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TDE100

Reviews:

Related manuals for KX-TDE100

Brands by name

Popular brands

Panasonic KX-TDE100, Programming Manual

Search results

Summary of Contents for KX-TDE100

Reviews:

Related manuals for KX-TDE100

Brands by name

Popular brands