3.
Hook the main unit on the screw heads.
Mounting on Concrete or Mortar Wall
WARNING
Only use the wall-mounting equipment (screws, washers) included with the PBX.
CAUTION
•
Do not block the openings of the cabinet. Leave at least 20 cm of space above and 10 cm to the sides
of the PBX for ventilation.
•
Make sure that the surface behind the cabinet is flat and free of obstacles, so that the openings on the
back of the cabinet will not be blocked.
Notice
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
•
When this product is no longer in use, make sure to detach it from the wall.
•
Be careful not to drop the cabinet.
1.
Place the reference for wall mounting (on the last page of this manual) on the wall to mark the 3 screw
positions.
250 mm
130 mm
60
Installation Manual
2.2.10 Wall Mounting (KX-TDA30)
Summary of Contents for KX-TDA30
