Panasonic KX-TDA30, Installation Manual

Page: 47 / 264

Card Slot Number
Type Max 02 03 04 05 06 07 08 09 10 11
MSG2 2
4
ü ü ü ü
SVM2 2 ü ü ü ü
ESVM2 4 ü ü ü ü
*1
Only one of either the DLC4 or SLC4 card can be installed.
*2 A maximum of two DLC8 cards, two SLC8 cards, or one of each card can be installed.
*3 Only one of either the DPH4 or DPH2 card can be installed.
CAUTION
To protect the main board from static electricity, do not touch parts on the main board or on the optional
service cards. To discharge static electricity, touch ground or wear an earthing strap.
Note
•
When installing or removing the optional service cards, the power switch of the PBX must be in the off
position.
•
For each card, the maximum number that can be installed in the PBX is listed in "1.3.1 Optional
Equipment".
•
Any card that exceeds the capacity of the PBX will be ignored.
•
When the PBX starts up with an invalid configuration, some cards will be ignored.
Installing Optional Service Cards
1.
Before installing the optional service cards, cut and remove the appropriate dummy cover plates from the
main unit.
Dummy Cover Plate
CAUTION
For safety reasons, smooth the cut edges after removing the dummy cover plates.
Installation Manual 47
2.2.7 Installing/Removing the Optional Service Cards