Panasonic KX-TDA30, Installation Manual

Page: 143 / 264

1
2
3
4
5
6
7
8
D1C
D2C
D1B
D2A
D2B
D1D
D2D
D1A
CS 1 (RJ45)
DLC8 card (RJ11)
Pin No. Signal Name
Master
1
2
3
4
5
6
7
8
D1C
D2C
D1B
D2A
D2B
D1D
D2D
D1A
CS 2 (RJ45)
Pin No. Signal Name
Master
1
1
2
3
4
1
2
3
4
D1
D2
D1
D2
D1
D2
1
2
3
4
D1
D2
1
2
3
4
2
3
4
Signal Name Pin No. Port No.
5
1
2
3
4
D1
D2
: : :
Accessories and User-supplied Items for the CS
Accessories (included): Screws
´
2, Washers
´
2
User-supplied (not included): RJ45 connector
Note
•
The no. 4 and no. 5 pins (Master) of the CS must be connected to a pair of pins on the Super Hybrid
Port or DLC4/DLC8 card. Then use 4 consecutive pairs of pins on the Super Hybrid Port or DLC4/
DLC8 card, starting with the pins corresponding to the Master, as in the example above.
•
When connecting multiple KX-TDA0158CE CSs to a Super Hybrid Port or a DLC4/DLC8 card, make
sure that the no. 4 and no. 5 pins (Master) of adjacent CSs are at least 3 pairs of pins away on the
card.
•
CS connections must be made within the same Super Hybrid Port or DLC4/DLC8 card.
•
When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed. Check
the connection of CS and the PBX using the Maintenance Console. For information about how to view
CS information using the Maintenance Console, refer to "2.6.14 Utility—CS Information" in the PC
Programming Manual.
Installation Manual 143
2.7.7 Connecting a Cell Station to the PBX