manualshive.com logo in svg

Panasonic KX-TD816G, User Manual, Page: 92 / 250

Share
Download
Panasonic KX-TD816G User Manual Download Page 92

Account Code Entry

An Account Code is used to identify incoming and outgoing CO calls, for accounting and
billing purposes. The account code is appended to the “Station Message Detail Recording
(SMDR)” call record. For incoming CO calls, account codes are optional. There are three
modes available for entering an account code during an outgoing call: Verified - All Calls
mode; Verified - Toll Restriction Override mode; and Option mode. One mode is selected for
each extension on a “Class of Service*

1

” basis.

Soft Button Operation

Entering account codes before dialing

1. Lift the handset or press the SP-PHONE button.

2. Press the ACCNT (S3) button.

• You hear an intermittent tone.*

2

• The display shows:

3. Enter the account code and #.

• You hear a dial tone.

4. Press a CO button or dial the line access code (0 or 81 through 88)

and dial.

Entering account codes during or after a conversation

While having a conversation or hearing reorder tone after the other party
hangs up (within 15 seconds);

1. Press the ACCNT (S3) button.

• You can keep talking.

2. Enter the account code and #.

A

4.2

DPT Features

4-8

DPT Features

Enter ACCNT Code?

1

3

account code and #

2

S 1

S 2

S 3

ACCNT

CO

4

1

2

account code and #

S 1

S 2

S 3

ACCNT

Summary of Contents for KX-TD816G



























































































































































































































































Reviews:

No comments