Panasonic KX-TD816G User Manual Download Page 117

Page: 117 / 250

4.2

DPT Features

DPT Features

4-33

Call Hold Retrieve

Allows you to retrieve a call that has been placed on hold by another extension.

Retrieving a CO call on hold

- at another extension;

1. Press the CO button whose indicator is flashing red slowly.

• The CO indicator light turns steady green.

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (53).

3. Dial the held CO line number (01 through 08) or (01 through 24).

- 01 through 08 : if you are connected to the KX-TD816.

- 01 through 24 : if you are connected to the KX-TD1232.

• You hear a confirmation tone (optional).

Retrieving an intercom call on hold

- at another extension;

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (51).

3. Dial the holding extension number.

• You hear a confirmation tone (optional).

Condition

• A confirmation tone is audible when the call is retrieved by the feature number. Eliminating the

tone is programmable.

held CO line number

holding extension number

Summary of Contents for KX-TD816G



























































































































































































































































Search results

Summary of Contents for KX-TD816G

Reviews:

Panasonic KX-TD816G, User Manual, Page: 117 / 250

Search results

Summary of Contents for KX-TD816G

Reviews: