manualshive.com logo in svg

Panasonic KX-TD816G, User Manual, Page: 115 / 250

Share
Download
Panasonic KX-TD816G User Manual Download Page 115

4.2

DPT Features

C

DPT Features

4-31

Call Hold

Allows you to place an intercom or CO call on hold.

To place a call on hold

While having a conversation;

1. Press the HOLD button.

• The CO or INTERCOM indicator light flashes green moderately.

• The current call is placed on exclusive hold.

2. Press the HOLD button again.

• The CO or INTERCOM indicator light flashes green slowly.

• The current call is placed on hold.

Retrieving a call on hold

-at the holding extension;

1. Press the CO or INTERCOM button which is flashing green slowly.

• The CO or INTERCOM indicator light turns steady green.

Conditions

• To retrieve a call on hold at another extension, refer to “Call Hold Retrieve” in this manual.

• If a held call is not retrieved within the specific period of time (default: 60 sec.), “Hold

Recall” occurs.

• If a CO call is placed on hold and not retrieved in fifteen minutes, it is automatically

disconnected.

• CO calls and one intercom call can be placed on hold at the same time.

Programming References

• System Programming — Installation Manual

[200] Hold Recall Time

Feature References

Call Hold Retrieve

Hold Recall (

→

see Installation Manual)

1

2

1

CO

INTERCOM

or

Summary of Contents for KX-TD816G



























































































































































































































































Reviews:

No comments