Panasonic KX-TD816G User Manual Download Page 159

Page: 159 / 250

4.2

DPT Features

DPT Features

4-75

Full One-Touch Dialing

This feature automatically activates the handsfree speakerphone and dials a phone number or
accesses a system feature at the touch of a button.

1. Press the flexible button assigned as the One-Touch Dialing, DSS,

REDIAL, or SAVE button.

• The SP-PHONE indicator light turns red.

• The CO or INTERCOM indicator light turns green.

Conditions

• This feature is also available with DSS buttons on a DSS Console.

• It is necessary to program full one-touch dialing mode.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — DSS Button, One-Touch Dialing Button, SAVE Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Full One-Touch Dialing Assignment

Summary of Contents for KX-TD816G



























































































































































































































































Search results

Summary of Contents for KX-TD816G

Reviews:

Panasonic KX-TD816G, User Manual, Page: 159 / 250

Search results

Summary of Contents for KX-TD816G

Reviews: