Station Programming
2-27
2.2
Programming
One-Touch Dialing Button
(Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a One-Touch Dialing button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS, PF) button which you wish to
assign as a One-Touch Dialing button.
2. Dial 2.
• The display shows:
3. Enter the desired number (an extension number or a phone number,
etc.).
• Up to 16 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER (
) button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The number can be an extension number, a telephone number, or a feature number. Up to
sixteen digits can be stored on a One-Touch Dialing button.
• To store the telephone number of an outside party, the line access code (0, or 81 through 88)
must be stored as the leading digit.
• You can store a number consisting of seventeen digits or more by dividing it and assigning it
in two One-Touch Dialing buttons. In this case, the line access code should not be stored on
the second button.
• You can use 0 through 9,
, #, PAUSE (
), FLASH (
), CONF (
) and INTERCOM
(INT) for storing:
#: change the dialing mode (Pulse to Tone)
FLASH (
): Flash
PAUSE (
): pause
CONF (
): — (hyphen)
INTERCOM (INT): for secret dialing
1
2
4
...
3
desired number
2
CLR
Summary of Contents for KX-TD816G
Page 24: ...1 18 DPT Overview ...
Page 250: ...4 166 DPT Features ...