manualshive.com logo in svg

Panasonic KX-TD816G, User Manual, Page: 147 / 250

Share
Download
Panasonic KX-TD816G User Manual Download Page 147

4.2

DPT Features

D

DPT Features 

4-63

Do Not Disturb for Direct Dial In Calls

You can set “Do Not Disturb (DND)” feature for Direct Dial In (DDI) calls. Direct Dial In
calls will be transferred to the operator. The operator cannot set this feature.

Setting

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (56) and 1.

• You hear a confirmation tone and then a dial tone.

• The display shows:

• The FWD/DND indicator light turns on.

3. Hang up or press the SP-PHONE/MONITOR button.

Cancelling

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (56) and 0.

• You hear a confirmation tone and then a dial tone.

• The display shows:

• The FWD/DND indicator light turns off.

3. Hang up or press the SP-PHONE/MONITOR button.

Conditions

• When this feature is set, an incoming call (directed by Intercept Routing or DIL 1:1, DIL

1:N) can be answered.

• Even if this feature is set, your extension doesn’t deny Direct Dial In calls in the following

cases:

1) The destination of DDI is UCD.

2) The destination of DDI is the Hunting group member that is set this feature.

DND-DDI Set

DND-DDI Cancel

1

2

3

5

6

1

1

2

3

5

6

0

Summary of Contents for KX-TD816G



























































































































































































































































Reviews:

No comments