manualshive.com logo in svg

Panasonic KX-TD816G, User Manual, Page: 170 / 250

Share
Download
Panasonic KX-TD816G User Manual Download Page 170

L

4.2

DPT Features

4-86

DPT Features

In the Private mode;

When callers are connected to your voice mailbox, an alert tone is sent. The Live Call
Screening indicator light flashes green rapidly when a caller is connected to your voice
mailbox. (When using a single line telephone, which is connected with a proprietary
telephone in parallel, you hear ringing.)

Stopping the alert tone

1. Press the FLASH button or the Live Call Screening Cancel button.

• The Live Call Screening indicator light turns steady red from

rapid flashing green.

• The alert tone stops.

Monitoring the recording message

1. Lift the handset or press the SP-PHONE/MONITOR button, the

flashing Live Call Screening button or INTERCOM button.

(When using a single line telephone, which is connected with a
proprietary telephone in parallel, only the handset is available).

• The Live Call Screening indicator light flashes green slowly.

• To stop monitoring, lift the handset. The FLASH button or the

Live Call Screening Cancel button can be also used to stop
monitoring. The Live Call Screening indicator light turns steady
red from slow flashing green.

Having a conversation with the party

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Press the flashing Live Call Screening button. (When using a single

line telephone, which is connected with a proprietary telephone in
parallel, flash the hooking instead.)

• The Live Call Screening indicator light turns steady red from

slow green flashing.

• In Keep Recording mode, the Two-Way Record indicator light

turns on.

1

1

1

2

LCS

Summary of Contents for KX-TD816G



























































































































































































































































Reviews:

No comments