Panasonic KX-TD6112E Features Manual Download

Page: 23 / 306

General Features

Features Guide

Background Music (BGM)

Description

Allows the digital proprietary telephone user to listen to background music from the monitor
speaker on the telephone.

Conditions

•

The system has an external music jack. It is required to connect a user-supplied music
source. One source can be connected to the system.

•

It is required to select a music source used for BGM by System Programming.

•

The BGM is interrupted while off-hooked.

Installation Manual References

•

2.4.8 External Music Source Connection

Programming Guide References

•

[803] Music Source Use

Features Guide References

•

Background Music (BGM) — External

•

Music on Hold

User Manual References

•

2.8.10 Turning on the Background Music

Summary of Contents for KX-TD6112E



















































































































































































































































































































Search results

Summary of Contents for KX-TD6112E

Reviews:

Related manuals for KX-TD6112E

Brands by name

Popular brands

Panasonic KX-TD6112E, Features Manual

Search results

Summary of Contents for KX-TD6112E

Reviews:

Related manuals for KX-TD6112E

Brands by name

Popular brands