Panasonic KX-TCD410ALM, Service Manual

Page: 47 / 109

16. RF SPECIFICATION
16.1. Base Unit
Item Value Refer to -. * Remarks
TX Power More than 20 dBm ~ 25
dBm
Adjustment (Base Unit) (H)
Modulation 340 kHz/div ~ 402 kHz/
div
Adjustment (Base Unit) (I)
Data type: Fig31
Frequency Offset -50 kHz ~ +50 kHz
Adjustment (Base Unit) (J)
RX Sensitivity < 1000 ppm
Adjustment (Base Unit) (K)
Timing Accuracy < ± 5.0 ppm Adjustment (Base Unit) (L)
RSSI Level 0x34 hex ± A hex Adjustment (Base Unit) (M)
* : Refer to Adjustment (Base Unit) ()
16.2. Handset
Item Value Refer to -. ** Remarks
TX Power More than 20 dBm ~ 25
dBm
ADJUSTMENTS (HANDSET) (I)
Modulation 340 kHz/div ~ 402 kHz/
div
ADJUSTMENTS (HANDSET) (J) Data type: Fig31
Frequency Offset -50 kHz ~ +50 kHz
ADJUSTMENTS (HANDSET) (K)
RX Sensitivity < 1000 ppm
ADJUSTMENTS (HANDSET) (L)
Timing Accuracy < ± 10 ppm ADJUSTMENTS (HANDSET) (M)
RSSI Level 0x34 hex ± A hex ADJUSTMENTS (HANDSET) (N)
** : Refer to ADJUSTMENTS (HANDSET) ()
17. HOW TO CHECK THE HANDSET SPEAKER
1. Prepare the digital voltmeter, and set the selector knob to ohm meter.
2. Put the probes at the speaker terminals as shown below.
47