manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 414

5.5  System Data Control

5.5.1  PC Programming

Description

There are three levels of authorisation for programming the PBX, where each level controls which settings
the programming is allowed to access and change. The three levels are as follows:

Level

Description

Number of Accounts/Network

Installer

For dealers and system installers

1

User
(Administrator)

For on-site managers

128

User (User)

For end users

KX-NSX1000: 1000
KX-NSX2000: 2000

Conditions

•

Each account is assigned a password that is required to log in.

•

Users can be added using the Add User Wizard.

Only 1 person can log in to the system for the system settings and maintenance.

CAUTION

To the Administrator or Installer regarding account passwords

1.

Please provide all system passwords to the customer.

2.

To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.

3.

The PBX has no passwords set initially. For security, select an installer password as soon as the
PBX system is installed at the site.

4.

Change the passwords periodically.

5.

It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access.

Installation Manual References

5.3 Starting Web Maintenance Console

PC Programming Manual References

2.1.1 Web Maintenance Console Accounts
2.1.2 Access Levels
8 Users/Supervisors

Operating Manual References

3.2 System Programming Using Web Maintenance Console

5.5 System Data Control

414

Feature Manual

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands